The Dynascale belt weighing system model 1030 measures, among other things, feed to crushers, mill, sieves and other processes with accuracies as low as +- 1-2 %, in the most difficult conditions. The Dynascale process belt scale model 1030 allows you to monitor and control your production while providing information on efficient operations. The Dynascale belt weighing system model 1030 is designed for process belt weighing in the most complex industrial applications. It allows you to control the supply to your system while providing important information for efficient operations. The Dynascale 1030 belt weigher has the proven reliability of the 1030 weighing frame, together with the 526 speed sensor and the power of versatility of the advanced WI301 weighing electronics. The system is also  available in approved version, according to OIML standard, class 2.

Easy installation

The Dynascale belt scale model 1030 is easy to handle and install by simply 4 bolts, indoors or outdoors, on stationary or mobile belts. Its robust construction makes it suitable for the most difficult applications on a wide variety of applications.

The weighing frame
Its sleek and robust construction keeps the 1030 weighing frame fully in line with the conveyor frame. This one-piece weighing frame is fully assembled at the factory and is quick and easy to install and integrate into the conveyor belt. The weighing frame is designed to provide additional support and reinforcement to the belt structure, thus minimising deviations. The weigh frame 1030 offers is using 1 or 2 loadcells, depending on the application and belt width and insensitive to vibration, moisture and product accumulation, unlike many other systems.

The belt speed sensor
The WIS526 digital speed transducer is the most reliable and accurate speed transducer ever developed for use with belt weighers. By directly connecting the transducer to the belt reversing roller or a return roller, you are guaranteed an accurate belt run reading. No wheels running over the belt, preventing problems caused by product accumulation or belt slip.

Dynascales precision belt weigher model 1030

Weighing frame

  • No moving or wearing parts
  • Precision loadcell loaded on pull guarantees optimal alignment and accuracy
  • Total displacement of the weighing trough frame is less than 0.1 mm
  • Compact design to minimise product accumulation
  • Optional : calibration device

Speed sensor

  • Compact design in stainless steel, suitable for outdoor installation
  • High number of pulses for high accuracy

Accuracy guarantee 

On installations approved by us, we guarantee that the 1030 belt weighing system weighs and counts within a value of +- 1-2% of the test value. Calibration should be done via a known test weight, calibration chain or our standard electronic calibration.

  • Crushing plants
  • Chemical plants
  • Asphalt plants
  • Mining
  • Cement plants
  • Coal and iron ore handling
  • Paper mills
  • Gypsum factories
  • Sand and gravel companies
  • Ore extraction
  • Loading and unloading facilities


Dynascale 1030 weighing frame
Weighing section Single trough frame weighing frame
Weighframe design Composed of a weighing platform suspended in pivots and a support beam placed transversely over the conveyor frame. The rigid construction thus reinforces the weighing section of the conveyor.
Weighing frame construction Powder-coated structural steel, optionally galvanised or stainless steel
Space requirement Applicable in any standard conveyor belt
Number 1 or 2
Type Single point, stainless steel, IP68, ATEX optional
Mounting Load on traction
Power supply 10 VDC +-5%
Output 2 mV/V +- 0.1%
Combined error <0.0175 % FS
Non-reproducibility 0.01% FS
Operating temperature -10°C to +40°C
Temperature sensitivity Range 0.00093% FS/°C; Zero 0.00088% FS/°C
Overload Safe To 150% of load cell capacity; Max. to 300% FS
Belt speed sensor WIS526
Type Digital encoder with hollow shaft
Mounting Directly with a coupling on the output shaft of the reversing drum or a return roller
Housing Stainless steel housing, IP67
Mounting accessories Shaft with mounting arm
Weight Approx. 500 g
Weigh integrator
Type WI301
Display Alphanumeric, 5″ colour display
Calibration Zero points, zero point tracking, resistance simulation, weights, calibration chains or product
Communication Protocol of your choice (mA, profinet, profibus, ethernet TCP/IP,…)
Power supply 110 VAC, 240 VAC or 12-30 VDC
Digital inputs Up to 3
Digital outputs Up to 4
Housing Field mount IP69K (228 x 214 x 124 mm) or panel mounting, IP69K (241 x 180 x 47 mm)
Temperature range -10°C to +40°C
Calibrated version (OIML) Available, class 2, 1

Do you have questions? Don’t hesitate to contact us!