DYNASCALE BELT SCALE MODEL 1042

The Dynascale belt scale model 1042 is designed for conveyors with flat rollers. The Dynascale belt scale model 1042 allows you to monitor and control your production while providing information on efficient operations. The Dynascale belt scale model 1042 is designed for high accuracies and mostly used in food and tabbaco applications . The belt scale consists of the weighbridge model 1042, with an frame  on 2 loadcells, the speed sensor WIS526 and the (optionally calibrated) weighing electronics WI301 or WI8101E. Both weighing frame, speed sensor and weighing electronics have already proven themselves in practice in  belt weighing systems.

The weighing frame

The Dynascale belt scale model 1042 is easy to install, indoors or outdoors, on stationary or mobile belts and is customised to your applications. Its construction makes it suitable for the most applications on a wide variety of applications. It is used for product with light capacity and hight density.

Two bending beam loadcells, which are hermetically sealed load cells, have been strategically placed on adjusting plates outside the conveyor stringers. This setup ensures a stable and reliable foundation for accurate weight measurements. To further enhance precision, a weigh roller has been meticulously mounted on the load cells, ensuring it remains tension-free throughout its operation.

The speed sensor
The digital speed sensor is a highly accurate and reliable speed sensor, ideally suited for use with a belt scale. Its stainless steel construction and IP67 protection degree ensure that it can be used in virtually all conditions, indoors and outdoors, corrosive or not,…

The transducer is mounted on the reversing drum and/or a travel roller on the output shaft, via a rod and a coupling piece to provide a smooth and reliable connection.

The Integrator
The WI301 integrator is a weight integrator for dynamic weighing systems. By integrating the mV signal from the load cells in the weighing frame and the pulse signal from the speed sensor, the WI301 integrator generates a readout for the product flow in e.g. tonnes/hour. It is also possible to read out the belt load (kg/m), belt speed (m/s) and the daily counter or total counter (kg or Ton). The integrator can also be equipped with various optional boards for e.g. communication purposes. The integrator can be used for both approved and non-approved applications.

For feeder applications with PID we use our WI8101E Integrator(PID).

Accuracy guarantee
On installations approved by us, we guarantee that the Dynascale belt weighing system weighs and counts within a value of +- 0.5 % of the test value, between 20 and 100 % of the maximum capacity, provided it is calibrated with material and the conveyor installation is suitable for it.